Rapid Tool Laser Sintering, Boulder, Colorado

 
LaserForm ST-100 Properties
Specific Gravity
Thermal Conductivity
Coefficient of Thermal Expansion (10-6)
122°F - 302°F
Tensile - Yield Strength (0.2%)
Tensile Strength
Elongation
Young Modulus
Compression-Yield Strength (0.2%)
Maximum LaserForm ST-100 Part
Maximum Dimensions
Wall Thickness (min)
Features With Aspect Ratios
Up to 500 Pressure Die-Cast Al, Zn, and Mg Parts
7.7 (73°F)
8.6 BTU/(ft2)(hr)(°F/ft) @ 212°F
22.3 in/in/°F
44.2 x 103 psi
74.0 x 103 psi
10%
1.99 x 107 psi
46.0 x 103 psi
at least 20 lbs
at least 10" x 13" x 5"
>.040"
<10:1
Back